某型直流充电柜温度场仿真

对某型直流充电柜满负载工况下温度场进行仿真,根据实验测量数据验证仿真结果准确性,成功完成了对充电柜温度场的建模仿真工作,并实现对初始模型的简化,为对整个充电站进行温度场建模仿真奠定了基础。     

能量回馈型四象限电力电子负载在船舶电力系统动模试验中的应用

目前，随着船舶综合电力系统的发展，船用负载设备类型的增多导致目前交直流动模试验室无法真实模拟系统动态特性。为研究和分析能量回馈型四象限电力电子负载船舶电力系统动模试验的应用，本文通过分析四象限电力电子负载的拓扑结构和控制方式，在Matlab/Simulink仿真平台和动模试验室中分别进行了能量回馈型四象限电力电子负载相关功能试验。仿真和试验结果表明，能量回馈型四象限电力电子负载能够模拟不同类型的负载以及不同电压、功率等级的电源，并且在模拟负载时，能够将吸收的电能高效地反馈回电网，不仅可以提高工作效率，还能够起到节约电能的目的。     

喷孔位置对船用天然气发动机燃烧及排放影响的模拟研究

为了探究天然气与柴油喷孔位置对天然气发动机燃烧和排放的影响,基于L23/30天然气发动机,建立了柴油引燃天然气的发动机模型,利用CONVERGE软件对燃烧过程和排放进行模拟分析。模拟结果表明：由于天然气与柴油喷孔位置变化的影响,会导致柴油引燃天然气在空间的变化,因此对发动机的燃烧和排放造成了影响,通过对比不同喷嘴间的距离和不同喷嘴分布的设计方案得出,采用中心对称设计时获得了较好的燃烧和排放性能。     

全回转起重船多系统耦合运动响应仿真分析

根据运动学基本原理,计入船-吊物、船-锚链耦合影响以及起重船自身受到的外环境载荷,建立船舶多系统运动模型。利用MATLAB/Simulink软件进行仿真,对多系统耦合作用下的船舶运动进行数值分析。分别在不同的遭遇浪向角和不同的吊臂回转角下,对船舶在各自由度上的位移进行比较,得到其对船舶运动参数的影响规律。结果表明:起重船运动过程中因计入多系统耦合影响,自身运动也表现出更为符合实际的运动特性,为准确预报全回转起重船多系统的运动响应提供了更为科学的理论依据。     

救助船模拟器原型机关键技术研究

针对大风浪条件下救助船操纵训练的要求，有必要开发针对救助船的操纵模拟器。相比于传统的通用船舶模拟器，救助船模拟器原型机系统中引入六自由度平台运动系统，基于UDP协议传输船舶姿态数据实现实时体感模拟功能，可以模拟船舶在大风浪条件下剧烈摇动的操船环境，提高模拟训练的真实感。此外，系统中引入救助作业模拟模块的思想，可以更好地评估、训练船员在恶劣海况下配合其他救助人员完成救助任务的能力，提高执行海上救助任务的成功率与效率。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

Can we reliably assess climate mitigation options for air traffic scenarios despite large uncertainties in atmospheric processes?

Air traffic has an increasing influence on climate; therefore identifying mitigation options to reduce the climate impact of aviation becomes more and more important. Aviation influences climate through several climate agents, which show different dependencies on the magnitude and location of emission and the spatial and temporal impacts. Even counteracting effects can occur. Therefore, it is important to analyse all effects with high accuracy to identify mitigation potentials. However, the uncertainties in calculating the climate impact of aviation are partly large (up to a factor of about 2). In this study, we present a methodology, based on a Monte Carlo simulation of an updated non-linear climate-chemistry response model AirClim, to integrate above mentioned uncertainties in the climate assessment of mitigation options. Since mitigation options often represent small changes in emissions, we concentrate on a more generalised approach and use exemplarily different normalised global air traffic inventories to test the methodology. These inventories are identical in total emissions but differ in the spatial emission distribution. We show that using the Monte Carlo simulation and analysing relative differences between scenarios lead to a reliable assessment of mitigation potentials. In a use case we show that the presented methodology can be used to analyse even small differences between scenarios with mean flight altitude variations.     

考虑同伴群动态交流分组的行人仿真模型研究

朋友、家人等社会群体结伴出行的同伴群在行人流中常占有较高比例.由于交流需求,同伴群趋于肩并肩行走以横向成排或接近浅V型的形态前进.在现有研究中,基于社会力的同伴群行人微观仿真模型对这一现象的描述最符合实际.本文观测发现,随着人流密度的增加或同伴群成员数量增多,同伴群通常动态呈现前后分组、横向成排空间形态,这是每个同伴群成员为寻求一个合适的行走位置,对满足交流需求和降低前进阻力权衡决策后呈现的自组织现象.本文提出动态交流分组模型对同伴群成员个体决策机理进行刻画,在此基础上,通过仿真实验分析同伴群对行人流动力学特性产生的影响.仿真研究结果表明,模型较好重现了同伴群随密度和人数增加的动态分组现象;同伴群的存在会降低行人流速度,但其影响强度随人流密度的增加而减弱;同伴群动态交流分组模型的引入会提升仿真行人流的通行效率,使之更加接近真实行人流的运动特性.     

基于神经网络对电控柴油机运行特性影响因素仿真研究

基于AVL-BOOST软件仿真平台建立某船用四缸柴油机仿真模型,标定后的模型进行柴油机全工况仿真计算.仿真出来的3 200组数据作为人工神经网络输入数据,采用贝叶斯统计方法对网络进行训练建立2层的反馈神经网络仿真模型.并分别通过实验、AVL-BOOST和神经网络数据曲线的对比分析,验证人工神经网络预测的准确性.利用验证好的人工神经网络模型预测进排气压力对柴油机转矩的影响,以及预测压缩比和供油定时对柴油机排放性能和动力性能的影响,最后利用扰动法分析不同工况下柴油机各个参数对柴油机性能的影响程度.     

小郭巨渔港工程防波堤平面布置方案

波浪是渔港建设中最重要的水动力因素,由于外海风浪作用强烈,影响港内渔船泊稳,需修建防波堤挡潮抗浪。从波浪角度研究防波堤平面布置,首先分析了舟山市六横岛小郭巨渔港工程的建设条件,确定防浪掩护控制标准,并提出防波堤直线形、折线形布置的8个平面布置方案。以满足渔船有效泊稳面积为准,采用MIKE21 BW模块计算在50 a一遇波浪与水位组合条件下堤后波高分布及防浪掩护效果,对8个方案进行研究,基于其中相对较优方案,进行了2个方案的优化。最终确定某渔港防波堤平面布置最优方案为:防波堤总长350 m、折堤夹角132°、直线段长122 m、折线段长228 m。